Tacoma/scheel-mann KLIMA passenger seat mounting system

NOTE: accessory switches and OEM seat rails not included
 
Passenger side seat mounting system for upgrading your Toyota Tacoma seats to scheel-mann's the KLIMA Vario F or F XXL seats into a Gen2 or 3 Tacoma. The new design is specifically designed for KLIMA seats and now includes an integrated storage box and two cube-style accessory switch holes.
 
NOTE: these switch holes are for the Toyota 22.2mm cube switches. These switch holes are NOT designed for the seat heat/cool switches. Those need to be more centrally located and closer to the operator.
 
This is the ONLY kit on the market that will seamlessly allow scheel-mann's the KLIMA  seats to be mounted into the Gen2 or 3 Toyota Tacoma AND solve the airbag dash light issue. Tolerance STACK solves this by engineering new load-cell positions. This also solves the issue of aftermarket seats sitting too high.  This is a vehicle specific, custom-fit bracket, not a universal one-size-fits-all mount.
 
Keeping Toyota’s load-cells in use means all of your Tacoma’s SRS airbag functions work as originally designed by Toyota. This is of course except for the in-seat airbag you remove when upgrading to any aftermarket seat. That specific SRS airbag circuit is remedied with a custom airbag proxy included as part of the kit.
 
Structurally, Tolerance STACK keeps the existing Tacoma seat belt mounting point in place without using a sub-par replacement mounting point.
 
Although scheel-mann's the KLIMA seats come with seat heater, seat coolers, and aftermarket harness/switches, Tolerance STACK has an available plug-n-play custom wiring harness and bracket if your 3rd Gen Tacoma came with factory installed seat heaters and switches allowing you to retain OEM heater switches. If your seats did not come with factory seat heaters then we include a harness extension for use with the scheel-mann seat heater wiring harness. 
 
Includes:
(TS-AS038-B) P.S. seat pan mount, .120" steel
(TS-AS011-B) P.S. left front steel bracket
(TS-AS012-B) P.S. right front steel bracket
(TS-AS013-B ) P.S. left rear CNC aluminum bracket
(TS-AS014-B ) P.S. right rear CNC aluminum bracket
(TS-AS015-S ) P.S. sensor computer mount
(TS-AS016-S ) P.S. harness and proxy mount (Tacoma w/factory seat heater)
(TS-AS017-B ) P.S. front solid steel rod crossmember
(TS-AS018-B ) P.S. rear solid steel rod crossmember
(TS-AS040-B) P.S. outboard accessory side panel, 3/16" aluminum (fire ext./mount NOT included)
(TS-AS020-B ) P.S. seat belt spacer
(TS-AS021-X ) P.S. hardware tray w/bolt gauge
(TS-AS022-S ) P.S. harness mount spacer
(TS-AS043-X) Heater extension harness
Either Type 1 (TS-US029-Y) or Type 2 (TS-US030-Y) airbag proxy
(TS-UT044-X) Bolt gauge
 
OPTIONAL:
(TS-AS046-B) Inner Transmission Tunnel Ram Mount Bracket
 
Designed & Manufactured in America