NOTE: If you have a sunroof AND are over 6'1" please email us before ordering.
 
Driver side seat mounting system for upgrading your Toyota Tacoma seats to scheel-mann's the KLIMA Vario F or F XXL seats into a Gen2 or 3 Tacoma. The new design is specifically designed for KLIMA seats and now includes an integrated storage box and two cube-style accessory switch holes.
 
NOTE: these switch holes are for the Toyota 22.2mm cube switches. These switch holes are NOT designed for the seat heat/cool switches. Those need to be more centrally located and closer to the operator.  
 
This is the ONLY kit on the market that will seamlessly allow scheel-mann's the KLIMA  seats to be mounted into the Gen2 or 3 Toyota Tacoma AND solve the airbag dash light issue. This is a vehicle specific, custom-fit bracket, not a universal one-size-fits-all mount.
 
Keeping Toyota’s sensors in use means all of your Tacoma’s SRS airbag functions work as originally designed by Toyota. This is of course except for the in-seat airbag you remove when upgrading to any aftermarket seat. That specific SRS airbag circuit is remedied with a custom airbag proxy included as part of the kit.
 
Structurally, Tolerance STACK keeps the existing Tacoma seat belt mounting point in place without using a sub-par replacement mounting point.
 
Although scheel-mann's the KLIMA seats come with seat heater, seat coolers, and aftermarket harness/switches, Tolerance STACK has an available plug-n-play custom wiring harness and bracket if your 3rd Gen Tacoma came with factory installed seat heaters and switches allowing you to retain OEM heater switches. If your seats did not come with factory seat heaters then we include a harness extension for use with the scheel-mann seat heater wiring harness. 
 
NOTE: If you have a 3rd Gen Tacoma with factory installed seat heaters, we include a heater harness BUT you will need to make sure your scheel-mann seat has the Tolerance Stack thermister installed. The unit supplied with the stock seat will not work. 
 
Includes:
(TS-AS037-B) Driver side seat pan 
(TS-AS039-B) Driver side trim panel
(TS-AS004-X) Driver side hardware kit
(TS-AS005-B) Driver side seat belt spacer
(TS-AS043-X) Heater extension harness
Either Type 1 (TS-US029-Y) or Type 2 (TS-US030-Y) airbag proxy
(TS-UT044-X) Bolt gauge
 
OPTIONAL:
(TS-AS046-B) Inner Transmission Tunnel Ram Mount Bracket
Donor rails
OEM heater harness
Proximity sensor conversion harness
 
Designed & Manufactured in America