FJ Cruiser/scheel-mann KLIMA passenger seat mounting system

NOTE: accessory switches and OEM seat rails not included
 
Passenger side seat mounting system for upgrading your Toyota  seats to scheel-mann's the KLIMA Vario F or F XXL seats into an FJ Cruiser. The new design is specifically designed for KLIMA seats and now includes an integrated storage box and two cube-style accessory switch holes.
 
NOTE: these switch holes are for the Toyota 22.2mm cube switches. These switch holes are NOT designed for the seat heat/cool switches. Those need to be more centrally located and closer to the operator.
 
NOTE: the Tolerance Stack mounting brackets with the scheel-mann seat place the seat height at just under the midway of the OEM seat adjustment height. 
 
This is the ONLY kit on the market that will seamlessly allow scheel-mann's the KLIMA  seats to be mounted into the FJ Cruiser AND solve the airbag dash light issue. Tolerance STACK solves this by engineering new load-cell positions. This also solves the issue of aftermarket seats sitting too high.  This is a vehicle specific, custom-fit bracket, not a universal one-size-fits-all mount.
 
Keeping Toyota’s load-cells in use means all of your FJ Cruiser's SRS airbag functions work as originally designed by Toyota. This is of course except for the in-seat airbag you remove when upgrading to any aftermarket seat. That specific SRS airbag circuit is remedied with a custom airbag proxy included as part of the kit.
 
Structurally, Tolerance STACK keeps the existing FJ Cruiser seat belt mounting point in place without using a sub-par replacement mounting point.
 
Scheel-mann's the KLIMA seats come with seat heater, seat coolers, and aftermarket harness/switches. Since your seats did not come with factory seat heaters then we include a harness extension for use with the scheel-mann seat heater wiring harness. 
 
Includes:
(TS-AS038-B) P.S. seat pan mount, .120" steel
(TS-AS011-B) P.S. left front steel bracket
(TS-AS012-B) P.S. right front steel bracket
(TS-AS013-B ) P.S. left rear CNC aluminum bracket
(TS-AS014-B ) P.S. right rear CNC aluminum bracket
(TS-AS015-S ) P.S. sensor computer mount
(TS-AS016-S ) P.S. harness and proxy mount (Tacoma w/factory seat heater)
(TS-AS017-B ) P.S. front solid steel rod crossmember
(TS-AS018-B ) P.S. rear solid steel rod crossmember
(TS-AS040-B) P.S. outboard accessory side panel, 3/16" aluminum (fire ext./mount NOT included)
(TS-AS020-B ) P.S. seat belt spacer
(TS-AS021-X ) P.S. hardware tray 
(TS-AS022-S ) P.S. harness mount spacer
(TS-AS043-X) Heater extension harness
(TS-US029-Y) Type 1 airbag proxy
TS-UT044-X) Bolt gauge
 
OPTIONAL:
(TS-AS046-B) Inner Transmission Tunnel Ram Mount Bracket
 
Designed & Manufactured in America